LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Sonata L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Actuators and Solenoids - A/T >> Shift Solenoid >> Testing and Inspection >> Component Test and Ohm Specification

Component Test and Ohm Specification

SOLENOID VALVE

INSPECTION
1. If the value is out of specification according to the chart, remove the valve body cover.





2. Measure the resistance again after disconnecting solenoid valve connector.





Specification (20°C): 2.5 - 3.5 Ohms (LR, 2ND, UD, OD, TCC) 4.3 - 4.4 Ohms (VFS)





3. If the value is out of specification replace the solenoid valve.
scientia non olet · About LEMON Manuals