Installation
FRONT STRUT ASSEMBLYINSTALLATION
1. Install the strut assembly (B) and then install the strut lower mounting bolts (A).
Tightening torque 45 - 60 Nm (4.5 - 6.0 kgf-m, 32.5 - 43.4 ft. lbs.)
2. Install the fork (B) to the strut assembly (A) with the I.D. mark facing outward.
Tightening torque 60 - 80 Nm (6.0 - 8.0 kgf-m, 43.4 - 57.8 ft. lbs.)
3. Install the fork (A) to the front lower arm connector (B).
Tightening torque 140 - 160 Nm (14-16 kgf-m, 101.2 - 115.7 ft. lbs.)
4. Install the front stabilizer link (B) to the fork (A).
Tightening torque 100 - 120 Nm (10 - 12 kgf-m, 72.3 -86.8 ft. lbs.)
5. Install the speed sensor bolt (A).
6. Install the brake hose bracket (B) to the fork and speed sensor cable mounting bolt (C) to the axle assembly.
7. Install the wheel and the tire to the front hub.
Tightening torque 90 - 110 Nm (9 - 11 kgf-m, 65.1 - 79.5 ft. lbs.)
CAUTION: Be careful not to damage the hub bolts when installing the front wheel and tire.