LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Sonata L4-2.4L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Brakes and Traction Control >> Wheel Speed Sensor >> Testing and Inspection >> Component Tests and General Diagnostics >> Front

Front

FRONT WHEEL SPEED SENSOR

INSPECTION





1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.

CAUTION: In order to protect the wheel speed sensor, when measuring output voltage, a 75 Ohms resistor must be used as shown.





2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.
scientia non olet · About LEMON Manuals