LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Azera SE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Inspection >> Speedometer

Instrument Cluster: Inspection: Speedometer

  1. Adjust the pressure of the tires to the specified level.
  2. Drive the vehicle onto a speedometer tester. Use wheel chocks as appropriate.
  3. Check if the speedometer indicator range is within the standard values.
    CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.
    NOTE: Tire wear and tire over or under inflation will increase the indication error.
    Fig 1: Identifying Wheel Chocks
    G04802988Courtesy of HYUNDAI MOTOR CO.

    [KM/H] 

    SPEEDOMETER VELOCITY AND TOLERANCE REFERENCE

    Velocity (km/h) 20 40 60 80 100
    Tolerance (km/h) +5.0 +0.0 +6.3 +0.2 +7.5 +0.2 +8.7 +0.2 +9.9 +0.4
    Velocity (km/h) 120 140 160 180 200
    Tolerance (km/h) +11.0 +0.4 +12.2 +0.4 +13.4 +0.6 +14.6 +0.6 +15.6 +0.6

    [MPH] 

    SPEEDOMETER VELOCITY AND TOLERANCE REFERENCE

    Velocity (MPH) 10 20 40 60
    Tolerance (MPH) +2.5 -1.0 +2.5 -1.0 +2.5 -1.0 +2.5 -1.0
    Velocity (MPH) 80 100 120 140
    Tolerance (MPH) +2.5 -1.0 +3.0 -1.0 +3.0 -1.0 +3.0 -1.0
scientia non olet · About LEMON Manuals