Instrument Cluster: Inspection: Speedometer
- Adjust the pressure of the tires to the specified level.
- Drive the vehicle onto a speedometer tester. Use wheel chocks as appropriate.
- Check if the speedometer indicator range is within the standard values.CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.NOTE: Tire wear and tire over or under inflation will increase the indication error.
SPEEDOMETER STANDARD VALUE CHART - CANADA - KM/H
| Velocity (km/h) | 20 | 40 | 60 | 80 | 100 |
| Tolerance (km/h) | +4.1 +0.7 | +4.2 +1.3 | +6.1 +1.9 | +7.0 +2.6 | +7.8 +3.2 |
| Velocity (km/h) | 120 | 140 | 160 | 180 | 200 |
| Tolerance (km/h) | +8.5 +3.9 | +9.3 +4.5 | +10.2 +5.2 | +10.8 +5.8 | +11.4 +6.4 |
SPEEDOMETER STANDARD VALUE CHART - MPH
| Velocity (MPH) | 10 | 20 | 40 | 60 |
| Tolerance (MPH) | +2.8 +0.4 | +3.7 +0.7 | +5.0 +1.4 | +6.0 +2.0 |
| Velocity (MPH) | 80 | 100 | 120 | - |
| Tolerance (MPH) | +6.6 +2.6 | +7.2 +3.2 | +7.9 +3.9 | - |