LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2006 >> Accent Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Inspection >> Fuel Gauge Sender

Fuel Gauge Sender

  1. Using an ohmmeter, measure the resistance between terminals 1 and 3 of sender connector (A) at each float level.
    Fig 1: Measuring Resistance Between Terminals 1 And 3 Of Sender Connector
    G04802991Courtesy of HYUNDAI MOTOR CO.
  2. Also check that the resistance changes smoothly when the float is moved from "E" to "F".
    TERMINALS RESISTANCE CHART

    Position Resistance(Ω)
    Sender(E) 184 ± 2
    Warning lamp 170 ± 2
    1/2 66 ± 1
    Sender(F) 15 ± 1
  3. If the height resistance is unsatisfied, replace the fuel sender as an assembly.
    CAUTION: After completing this test, wipe the sender dry and reinstall it in the fuel tank.
scientia non olet · About LEMON Manuals