Replacement of Transaxle Gear Oil

REPLACEMENT OF TRANSAXLE GEAR OIL
Use HYUNDAI GENUINE PARTS MTF SAE 75W/90 (API GL-4).
1. With the vehicle parked on a level surface, remove the drain plug and drain the transaxle oil.
2. Replace the gasket with a new one and install the drain plug.
3. Add new oil through the filler plug and, fill it to just below the plug opening.
Standard value Transaxle oil total capacity: 2.1 lit (2.2 U.S. qts., 1.8 imp.qts.)