LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Elantra L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Relays and Modules - A/T >> Shift Solenoid Relay >> Testing and Inspection

Shift Solenoid Relay: Testing and Inspection

A/T CONTROL RELAY CHECK
1. Remove the A/T control relay.
2. Use jumper wires to connect A/T control relay terminal 2 to the battery (+) terminal and terminal 4 to the battery (-) terminal.
3. Check the continuity between terminal (1) and terminal (3) of the A/T control relay when the jumper wires are connected to and disconnected from the battery.





4. If there is a problem, replace the A/T control relay.
scientia non olet · About LEMON Manuals