LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Elantra L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Shift Solenoid >> Testing and Inspection

Shift Solenoid: Testing and Inspection

SOLENOID VALVE CHECK
1. Remove the valve body cover.





2. Disconnect the connectors of each solenoid valve.
3. Measure the resistance between terminals 1 and 2 of each solenoid valve.








STANDARD VALUE








4. If the resistance is outside the standard value, replace the solenoid valve.

NOTE: Resistance of the solenoid valve connector.
scientia non olet · About LEMON Manuals