LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2005 >> Elantra L4-2.0L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Air Door Actuator / Motor Relay >> Service and Repair >> Mode Control Actuator

Mode Control Actuator

REPLACEMENT
1. Remove the 7P connector (A) from the mode actuator (B). Remove the self-tapping screws and the mode actuator from the heater unit.




2. Install in the reverse order of removal. After installation, make sure the mode actuator runs smoothly.
scientia non olet · About LEMON Manuals