LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Cooling System (3.5L)) >> Cooling System >> Thermostat >> Inspection

Cooling System: Thermostat: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Heat the thermostat as shown in the illustration.
  2. Check that the valve operates properly.
  3. Verify the temperature at which the valve begins to open.

Valve opening temperature : 80 ~ 84°C (176 ~ 183.2°F)

Full opening temperature : 95°C (203°F)

Fig 1: Checking Thermostat Opening Temperature
G00790519Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals