Cooling System: Radiator: Removal
WARNING: This page is about a different variant/trim than selected.
- Disconnect the ground cable from the battery terminal.
- Disconnect the fan motor connector.
- Loosen the radiator lower hose to drain the coolant.
- Disconnect the upper and lower hoses and overflow tube after marking the radiator hose and the hose clamp the ease reassembly.
- For vehicles with automatic transaxles, disconnect the oil cooler hoses from the automatic transaxle.CAUTION: Cover or plug the hose and inlets of the radiator so that dust and other foreign material etc. can not enter after the hose is disconnected from the radiator.
- Remove the head lamp.
For additional information refer to EXTERIOR LIGHTS .
- Remove the front bumper.
For additional information refer to EXTERIOR BODY PANELS .
- Remove the radiator fan motor from the radiator.