LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Cooling System (2.7L)) >> Cooling System >> Radiator >> Installation

Cooling System: Radiator: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Fill the radiator and reservoir tank with a clean coolant mixture.
  2. Run the engine until the coolant warms up enough so that the thermostat valve opens and then turn off the engine.
  3. Remove the radiator cap and pour the coolant up to the filler neck of the radiator. Fill the reservoir tank to the upper level.
  4. Check that there are no leaks from the radiator, hoses or connections.
scientia non olet · About LEMON Manuals