LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Cooling System (2.7L)) >> Cooling System >> Engine Coolant Pump >> Removal

Engine Coolant Pump: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Using the drain plug, drain the coolant.
  2. Remove the drive belt and the engine coolant pump pulley.
  3. Remove the timing belt cover, the auto tensioner and idler pulley.
  4. Remove the engine coolant pump mounting bolts.
  5. Remove the engine coolant pump assembly from the cylinder block.
scientia non olet · About LEMON Manuals