LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel System (3.5L)) >> MFI Control System >> Knock Sensor (KS) >> Troubleshooting Hints

Troubleshooting Hints

WARNING: This page is about a different variant/trim than selected.
  1. The DTC for knock sensor is displayed on the HI-SCAN PRO under the following condition:
    • When the knock sensor signal is not detected, even though the engine is in an overload condition.
    • When the knock sensor signal is abnormally low.
scientia non olet · About LEMON Manuals