Main Moving System: Camshaft: Inspection: Camshafts
WARNING: This page is about a different variant/trim than selected.
- Check the camshaft journals for wear. If the journals are badly worn out, replace the camshaft.
- Check the cam lobes for damage. If the lobe is damaged or excessively worn out, replace the camshaft.
Cam height
[Standard]
Intake : 43.95 ~ 44.15 mm (1.7303 ~ 1.7382 in.)
Exhaust : 43.95 ~ 44.15 mm (1.7303 ~ 1.7382 in.)
[Limit]
Intake / Exhaust : 43.45 mm (1.7106 in.)
- Check the cam surface for abnormal wear or damage, and replace if necessary.
- Check each bearing for damage. If the bearing surface is excessively damaged, replace the cylinder head assembly or camshaft bearing cap, as necessary.
Camshaft end play
0.1 ~ 0.15 mm (0.0039 ~ 0.0059 in.)