LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (2.7L V6 Engine) >> Engine Block >> Engine Mounts >> Removal >> Engine Mounting

Engine Mounting

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine mounting insulator bolts.
  2. Remove the engine mounting bracket from the engine.
    Fig 1: Identifying Engine Mounting Bracket
    G00790203Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals