LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (3.5L V6 Engine) >> Main Moving System >> Crankshaft >> Disassembly

Main Moving System: Crankshaft: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the timing belt train, front case, cylinder head assembly and oil pan.
  2. Remove the rear plate and the rear oil seal.
  3. Remove the connecting rod caps.
    NOTE: Mark the main bearing caps to be able to reassemble in the original position and direction.
  4. Remove the main bearing caps and remove the crankshaft. Keep the bearings in order according to the cap number.
scientia non olet · About LEMON Manuals