LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (3.5L V6 Engine) >> Main Moving System >> Connecting Rod >> Inspection >> Pistons And Piston Pins

Pistons And Piston Pins

WARNING: This page is about a different variant/trim than selected.
  1. Check each piston for scuffing, scoring, wear and other defects. Replace any piston that is defective.
  2. Check each piston ring for breakage, damage and abnormal wear. Replace the defective rings. When the piston requires replacement, its rings should also be replaced.
  3. Check that the piston pin fits in the piston pin hole. Replace any piston and pin assembly that is defective. The piston pin must be pressed smoothly by hand into the pin hole (at room temperature).
scientia non olet · About LEMON Manuals