LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (3.5L V6 Engine) >> Intake And Exhaust System >> Muffler And Catalytic Converter >> Installation

Muffler And Catalytic Converter: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily install the front muffler, the catalytic converter assembly and the rear muffler in this order.
  2. Install the rubber hangers so that they hang equally left and right.
  3. Tighten the parts securely and then confirm that there is no interference with any components.

Tightening torque 

30 ~ 40 Nm (300 - 400 kg.cm, 22 - 29.5 lb.ft)

scientia non olet · About LEMON Manuals