LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Santa Fe Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal & Installation

Removal & Installation

  1. Remove fluid level sensor harness connector. Remove brakelines from master cylinder, and plug open ports.
  2. Remove master cylinder mounting nuts. Disconnect proportioning valve mounting bracket, then lift out master cylinder. To install, reverse removal procedure. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS  . Bleed brake system. See BLEEDING BRAKE SYSTEM  .
scientia non olet · About LEMON Manuals