LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Accent Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Power Brake Booster >> Removal

Power Brake Booster: Removal

  1. Remove the air cleaner and the air duct. See Figure .
  2. Remove the brake fluid level switch connector. See Figure .
  3. After removing the brake reservoir cap, suck out the brake fluid in the reservoir using a syringe or equivalent.
  4. Disconnect the brake tube from the master cylinder.
    CAUTION: Take care not to contaminate the brake fluid.
  5. Remove the master cylinder from the brake booster.
  6. Remove the vacuum hose from the booster. See Figure .
  7. Remove the push rod from the brake pedal.
  8. Remove the booster mounting nuts. See Figure .