LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Accent Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Remove the air cleaner and the air duct. See Figure .
  2. Remove the brake fluid level switch connector. See Figure .
  3. Disconnect the brake tube from the master cylinder and install the plug. See Figure .
    CAUTION: Be careful not to bend or damage the brake lines when removing the master cylinder. To prevent spills, cover the hose joints with rags or shop towels.
  4. Remove master cylinder mounting nuts and then lift out the master cylinder. See Figure .
scientia non olet · About LEMON Manuals