LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2003 >> Accent Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Overhaul >> Master Cylinder >> Reassembly

Master Cylinder: Reassembly

  1. Apply genuine brake fluid to the rubber parts of the cylinder kit and grommets. See Fig 2 .
  2. Carefully insert the springs and pistons in the proper direction.
  3. Press against the pistons with a screwdriver and install the retainer ring. See Fig 1 .
  4. Mount two grommets.
  5. Install the reservoir on the cylinder.
Fig 1: Removing & Installing Brake Master Cylinder Piston Retaining Ring
G00306301Courtesy of HYUNDAI MOTOR CO.
Fig 2: Exploded View Of Master Cylinder
G00008491Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals