LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2002 >> Santa Fe Base, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments >> Pedal Height & Free Play >> Pedal Height (Pedal Released)

Pedal Height (Pedal Released)

  1. Measure pedal height from surface of floor board to top of brake pedal. See Figure . See BRAKE PEDAL ADJUSTMENT SPECIFICATIONS  table.
  2. If pedal height does not meet specification, back stoplight switch out until it does not contact pedal arm. Turn stoplight switch in until clearance between stoplight switch outer case and pedal arm is .02-.039" (.5-1.0 mm). Tighten lock nut. Recheck pedal height.
scientia non olet · About LEMON Manuals