LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2002 >> Accent GL, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Anti-Lock Brake System & Traction Control System) >> Removal & Installation >> Wheel Speed Sensors >> Removal & Installation (Front)

Removal & Installation (Front)

WARNING: This page is about a different car, the 2002 Hyundai XG350. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support vehicle. Remove wheel. Remove bolts for sensor and cable. Disconnect wheel speed sensor harness connector. Remove wheel speed sensor from vehicle. To install, reverse removal procedure. Tighten wheel speed sensor and cable bolts to specification. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals