LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2002 >> Accent GL, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Anti-Lock Brake System & Traction Control System) >> Diagnosis & Testing >> Retrieving & Clearing Diagnostic Trouble Codes

Retrieving & Clearing Diagnostic Trouble Codes

WARNING: This page is about a different car, the 2002 Hyundai XG350. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Connect HI-SCAN (PRO) or equivalent scan tool to Data Link Connector (DLC). DLC is located under left side of instrument panel, near kick panel.
  2. Turn ignition on. Following instructions on scan tool, navigate to ANTI-LOCK BRAKE SYSTEM. Using scan tool, retrieve ABS DTCs. If any DTCs are stored, perform appropriate testing procedure. See DIAGNOSTIC TROUBLE CODE DEFINITIONS  .
  3. After replacing or repairing malfunctioning components, clear DTCs by using CLEAR key on scan tool. DTCs can also be cleared by disconnecting negative battery cable.
scientia non olet · About LEMON Manuals