LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2001 >> XG300 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Disc Brake Pads >> Installation

Front Disc Brake Pads: Installation

  1. To compress piston into caliper, install hose onto bleed screw, and open bleed screw. Using hammer handle or similar tool, press piston back into caliper bore. Tighten bleed screw when piston is seated into caliper bore.
  2. To complete installation, reverse removal procedure. Tighten caliper guide bolt to specification. See TORQUE SPECIFICATIONS . Bleed brake system. See BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals