LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2001 >> XG300 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Bleeding Brake System >> Bleeding Procedures

Bleeding Procedures

  1. Ensure master cylinder reservoir is full of brake fluid. Connect hose to right rear wheel cylinder bleed screw, and insert other end of hose in clear container partially filled with brake fluid.
  2. Slowly pump brake pedal several times. While depressing brake pedal, loosen bleed screw at wheel cylinder until fluid starts to flow. Close bleed screw.
  3. Repeat operation until there are no bubbles in fluid. Tighten bleed screw to specification. See TORQUE SPECIFICATIONS . Repeat procedure for left front, left rear and right front wheels.
scientia non olet · About LEMON Manuals