LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2000 >> Sonata Base, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension System >> Removal & Installation >> Stabilizer Bar >> Installation (Elantra, Sonata & Tiburon)

Installation (Elantra, Sonata & Tiburon)

  1. To install, reverse removal procedure. Install stabilizer bar with marked side facing downward. Install stabilizer link onto stabilizer bar and lower control arm.
  2. Bottom of link should project through control arm, bushings and lock nut. Threaded portion projecting from lock nut should measure 0.2-0.3" (5-7 mm). Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals