LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2000 >> Sonata Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Electric Cooling Fans >> Component Tests >> Condenser Fan & Radiator Fan Relays >> Elantra & Tiburon

Elantra & Tiburon

  1. Remove condenser fan or radiator fan relay. Continuity should exist between terminals No. 3 and 5. Continuity should not exist between terminals No. 1 and 2. If continuity is as specified, go to next step. If continuity is not as specified, replace relay.
  2. Continuity should exist between terminals No. 1 and 2 when battery power and ground are applied between terminals No. 3 and 5. If continuity is as specified, relay is okay at this time. If continuity is not as specified, replace relay.
scientia non olet · About LEMON Manuals