LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2000 >> Sonata Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Drive Belt Routing & Adjustments & Cooling Specifications >> Removal & Installation >> Alternator/Water Pump Drive Belt >> Removal & Installation (Accent, Elantra & Tiburon)

Removal & Installation (Accent, Elantra & Tiburon)

  1. Loosen the coolant pump pulley bolts.
  2. Loosen the generator support nut. See Figure.
  3. Loosen the generator lock bolt and remove the belt.
  4. Remove the coolant pump pulley bolts.
  5. To install, reverse removal procedure. After installing the belt, adjust the belt tension as needed. Torque all fasteners to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals