LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2000 >> Sonata Base, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panels >> Component Tests >> Vehicle Speed Sensor >> Sonata & Tiburon

Sonata & Tiburon

  1. Disconnect vehicle speed sensor harness connector. Remove vehicle speed sensor. On Sonata with manual transmission, connect positive battery terminal to terminal No. 2 and negative battery terminal to terminal No. 3 at vehicle speed sensor. See Fig 1. Connect positive lead of voltmeter to terminal No. 1 and negative lead to terminal No. 3 at vehicle speed sensor.
  2. On Tiburon and Sonata with automatic transmission, connect positive battery terminal to terminal No. 3 and negative battery terminal to terminal No. 2 at vehicle speed sensor. Connect positive lead of voltmeter to terminal No. 1 and negative lead to terminal No. 2 at vehicle speed sensor.
  3. On all models, rotate vehicle speed sensor manually. Voltage should change from zero to 11 volts or more, 4 times per revolution. If vehicle speed sensor does not test as specified, replace vehicle speed sensor.
Fig 1: Identifying Vehicle Speed Sensor Terminals (Sonata)
G96J06233Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals