LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2000 >> Sonata Base, Automatic >> Labor Times >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All,Both Axles,w/Rear Disc Brakes1.8B
All,Both Axles,w/Rear Drum Brakes2.2B
Front,Both Sides1.00.3B
Rear,Both Sides,w/Drum Brakes1.40.7B
Rear,Both Sides,w/Rear Disc Brakes1.00.5B
Combination Procedure: CALIPER: Overhaul:
Includes: Bleed System.
One0.9B
One,w/o ABS0.9B
Combination Procedure: CALIPER: Replace:
Includes: Bleed System.
One0.9B
One,w/o ABS0.7B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Each Side0.6B
w/Rear Disc Brakes,Each Side0.4B
Combination Procedure: WHEEL BEARING: Replace:
Includes: Repack Bearings (where applicable).
Front,Both Sides.1.41.2B
Front,One Side0.80.6B
Rear,Drum Brake,One Side0.1B
Combination Procedure: WHEEL CYLINDER: Overhaul:
Includes: Bleed System.
One,Off Vehicle0.8B
One,On Vehicle0.7B
Combination Procedure: WHEEL CYLINDER: Replace:
Includes: Bleed System.
One0.3B