Fuel Gauge Sending Unit

Remove fuel gauge sending unit from fuel tank. Using ohmmeter, measure resistance of sending unit in each float position, between terminals No. 2 and 3 of sending unit. See FUEL GAUGE SENDING UNIT RESISTANCE TEST . SeeFigure . Replace fuel gauge sending unit if resistance is not as specified.

FUEL GAUGE SENDING UNIT RESISTANCE TEST

Float Position

⁽¹⁾ Ohms

"E"

103-117

1/2

28.5-36.5

"F"

1-5

⁽¹⁾	Ensure resistance changes smoothly as float is moved through each position.