LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1995 >> Scoupe Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Master Cylinder >> Disassembly

Master Cylinder: Disassembly

Place cylinder mounting flange in a soft-jawed vise. Remove reservoir cap and drain brake fluid into a suitable container. Remove reservoir from master cylinder. While depressing piston, remove snap ring. See Figure. Withdraw primary and secondary piston assemblies from master cylinder.

NOTE: DO NOT disassemble master cylinder piston assemblies.
scientia non olet · About LEMON Manuals