LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1995 >> Scoupe Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Front Disc Brake Caliper >> Disassembly

Front Disc Brake Caliper: Disassembly

  1. Remove caliper piston boot. See Figure. Place a narrow wooden block between piston and caliper that will allow piston to clear its bore and not be damaged by caliper end when removed.
  2. Using low pressure compressed air, apply air into caliper fitting hole to force piston out of caliper. Remove wood block and piston. Remove dust boot and piston seal (use small flat bladed screwdriver if necessary).
scientia non olet · About LEMON Manuals