LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 1995 >> Scoupe Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Component Testing >> Seat Belt Warning Switch

Seat Belt Warning Switch

  1. Disconnect seat belt switch connector, located near belt buckle. Using ohmmeter, check continuity between switch terminals. Ohmmeter should indicate infinite ohms (no continuity) with seat belt fastened and zero ohms (continuity) with it released.
  2. On models with passive seat belt, also disconnect lap belt switch connector. SeeFig 1 . Using ohmmeter, check continuity between switch terminals No. 1 and 3. Ohmmeter should indicate infinite ohms (no continuity) with seat belt fastened and zero ohms (continuity) with it released.
Fig 1: Lap Belt Switch Terminals (Passive Belts)
G96H06227Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals