15. Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal

Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal




1. Remove the following parts:

1. Manual valve link (89)
2. Manual shift detent lever hub pin (92) discard, do not reuse
3. Manual shift detent lever with shaft position switch assembly (88)
4. Parking lock actuator assembly (85)
5. Manual shaft (84)




6. Remove the manual shaft seal (82) with a screwdriver.




2. Remove the following components:

1. The parking lock bracket bolt (87)
2. The parking lock bracket (86)