Rear Window Wiper Motor Replacement

Fig 1: Wiper Motor Replacement - Rear

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear wiper arm. Refer to Rear Window Wiper Arm Replacement . Remove the jack stowage cover. Remove the jack stowage tool kit.
1	Rear Wiper Motor Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)
2	Rear Window Wiper Motor Tip: Pull motor rearward to access washer hose and electrical connections, lower motor into endgate and remove from exterior pivot shaft grommet.

Callout

Component Name

Preliminary Procedures

Remove the rear wiper arm. Refer to Rear Window Wiper Arm Replacement .
Remove the jack stowage cover.
Remove the jack stowage tool kit.

Rear Wiper Motor Bolt (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 10 N.m (89 lb in)

Rear Window Wiper Motor
Tip: Pull motor rearward to access washer hose and electrical connections, lower motor into endgate and remove from exterior pivot shaft grommet.