LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H3 L5-3.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Camshaft Gear/Sprocket >> Specifications

Camshaft Gear/Sprocket: Specifications

CAMSHAFT GEAR/SPROCKET





Tighten the intake camshaft sprocket bolt a first pass to 20 N.m (15 lb ft). Using the J 45059 rotate the bolt a final pass an additional 100 degrees.

Tighten the exhaust camshaft sprocket bolt a first pass to 25 N.m (18 lb ft). Using the J 45059 rotate the bolt a final pass an additional 135 degrees.
scientia non olet · About LEMON Manuals