| A/C Compressor Mounting Bolt |
50 N.m |
37 lb ft |
| A/C Refrigerant Pressure Sensor |
6 N.m |
53 lb in |
| Air Distributor Duct Mounting Screw |
1.9 N.m |
17 lb in |
| Air Inlet Assembly Mounting Stud |
4.5 N.m |
40 lb in |
| Blower Motor and Fan Assembly Mounting Screw |
1.5 N.m |
13 lb in |
| Blower Motor Relay Bracket Mounting Screw |
1.5 N.m |
13 lb in |
| Blower Motor Resistor Mounting Screw |
1.5 N.m |
13 lb in |
| Compressor Discharge Hose to Condenser Fitting |
9 N.m |
80 lb in |
| Compressor Suction and Discharge Hose to Compressor |
16 N.m |
12 lb ft |
| Compressor Suction Hose to TXV |
16 N.m |
12 lb ft |
| Evaporator Case Section to Blower Case Section Retaining Screw |
1.5 N.m |
13 lb in |
| Evaporator Tube to Condenser Fitting |
9 N.m |
80 lb in |
| Floor Air Outlet Mounting Screw |
1.5 N.m |
13 lb in |
| Heater Core Access Cover Screw |
1.5 N.m |
13 lb in |
| Heater Inlet and Outlet Hoses Bracket Bolt |
25 N.m |
18 lb ft |
| Heater/Vent Module Mounting Nut |
4.5 N.m |
40 lb in |
| Heater/Vent Module Mounting Screw |
4.5 N.m |
40 lb in |
| Heater/Vent Module Mounting Stud |
4.5 N.m |
40 lb in |
| Receiver Drier Clamp Screw |
4.2 N.m |
37 lb in |