Indicator/Warning Message Description and Operation

Indicators

Symbol	Reference
Courtesy of GENERAL MOTORS CORP.	ABS: ABS Description and Operation
Courtesy of GENERAL MOTORS CORP.	Air Bag: SIR System Description and Operation
Courtesy of GENERAL MOTORS CORP.GENERAL MOTORS CORP. (Canada) Courtesy of GENERAL MOTORS CORP.GENERAL MOTORS CORP. BRAKE (U.S.)	Brake: Brake Warning System Description and Operation
Courtesy of GENERAL MOTORS CORP.	Charge: Charging System Description and Operation
Courtesy of GENERAL MOTORS CORP. (Canada) CRUISE (U.S.)	Cruise: Cruise Control Description and Operation
Courtesy of GENERAL MOTORS CORP.	Fasten Safety Belt: Seat Belt System Description and Operation
Courtesy of GENERAL MOTORS CORP.	Fasten Passenger Seat Belts: Seat Belt System Description and Operation
Courtesy of GENERAL MOTORS CORP.	High Beam: Exterior Lighting Systems Description and Operation
Courtesy of GENERAL MOTORS CORP.	The IPC displays this indicator when the ECM detects a low engine oil pressure condition. The IPC receives a serial data message from the BCM requesting display of the indicator.
Courtesy of GENERAL MOTORS CORP.	Passenger Air Bag Off: SIR System Description and Operation
Courtesy of GENERAL MOTORS CORP.	Passenger Air Bag On: SIR System Description and Operation
Courtesy of GENERAL MOTORS CORP. (Canada) SECURITY (U.S.)	SECURITY: Content Theft Deterrent (CTD) Description and Operation
Courtesy of GENERAL MOTORS CORP.	Stability Caution: ABS Description and Operation
Courtesy of GENERAL MOTORS CORP. (Canada) SERVICE ENGINE SOON (U.S.)	Engine Control Module Description for the 3.7L engine Engine Control Module Description for the 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L engine
Courtesy of GENERAL MOTORS CORP.	Tire Pressure Monitor: Tire Pressure Monitor Description and Operation
Courtesy of GENERAL MOTORS CORP.	Turn Signals: Exterior Lighting Systems Description and Operation
Courtesy of GENERAL MOTORS CORP.	The IPC displays this indicator when the ECM determines that the vehicle should be shifted to the next higher gear.

DIC Warning Messages

Message	Reference
ABS FAULT	ABS Description and Operation
BATTERY	Charging System Description and Operation
BRAKES	Brake Warning System Description and Operation
CARGO LAMP	Interior Lighting Systems Description and Operation
CHANGE OIL	The IPC displays this message when the ECM determines that the engine oil should be changed. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator. Refer to GM Oil Life System Resetting .
FLUID	Brake Warning System Description and Operation
FUEL CAP	Fuel System Description for the 3.7L engine or Fuel System Description for the 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L engine
DOORS	Door Ajar Indicator Description and Operation
DOME LAMP	Interior Lighting Systems Description and Operation
ENG HOT	Cooling System Description and Operation
LOW FUEL	The IPC displays this message in the DIC when the IPC detects that the fuel level is less than a pre-determined value.
LOW TRAC	ABS Description and Operation
LOW TIRE	Tire Pressure Monitor Description and Operation
MAP LAMP	Interior Lighting Systems Description and Operation
OIL	The IPC displays this message in the DIC when the ECM detects a low engine oil pressure condition. The IPC receives a serial data message from the BCM requesting display of the message.
OIL LIFE	The IPC displays the engine oil life message when the ECM determines that the engine oil should be changed. The IPC receives a serial data message from the ECM indicating the remaining oil life percent.
PARK BRAKE	Park Brake System Description and Operation
REDUCED POWER	Engine Control Module Description for the 3.7L engine Engine Control Module Description for the 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L engine
SERV 4WD	Transfer Case Description and Operation
SERV VEH	Engine Control Module Description for the 3.7L engine Engine Control Module Description for the 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L engine
SERV TPM	Tire Pressure Monitor Description and Operation
SERVICE CHARGE SYS	Charging System Description and Operation
SERVICE STAB SYS	ABS Description and Operation
STAB SYS OFF	ABS Description and Operation
TRACTION FAULT	ABS Description and Operation
TRAC OFF	ABS Description and Operation