Sunshade Replacement

Fig 1: Sunshade

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the windshield pillar garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement .
1	Sunshade Screw (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 2.5 N.m (22 lb in)
2	Sunshade Assembly Procedure Lower the front of headliner enough to access electrical connector. Disconnect the electrical connector, if equipped.

Callout

Component Name

Preliminary Procedure:
Remove the windshield pillar garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement .

Sunshade Screw (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 2.5 N.m (22 lb in)

Sunshade Assembly

Procedure