Front Floor Upper Console Trim Plate Replacement (LHD w/Manual Transmission)

Fig 1: Trim Plate Replacement - Console Upper (Manual Transmission)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Do NOT pull or pry on the shift boot. This action may damage the shift boot retainers.
1	Console Upper Trim Plate Tip: Shifter bezel and console upper trim plate must be remove as one assembly.
2	Manual Shift Handle Screw CAUTION: Refer to Fastener Caution . Procedure Lift the console upper trim plate enough to access the shift handle retaining screw. Apply threadlock GM P/N 1234593 (Canadian P/N 10953488) to the shift lever set screw threads before reinstalling. Tighten: 25 N.m (18 lb ft)
3	Trim Clip Retainer (Qty: 6)