LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H2 V8-6.2L >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Seat Belt >> Service and Repair >> Seat Belt Replacement - Center Rear

Seat Belt Replacement - Center Rear




Seat Belt Replacement - Center Rear

Removal Procedure

1. Remove the rear seat armrest. Refer to Rear Seat Armrest Replacement (AL4) (Rear Seat Armrest Replacement (AL4))Rear Seat Armrest Replacement (SUV) (Rear Seat Armrest Replacement (SUV))Rear Seat Armrest Replacement (SUT) (Rear Seat Armrest Replacement (SUT)).




2. Remove the rear seat shoulder belt opening cover screw (1).
3. Remove the rear seat shoulder belt opening cover.
4. Remove the rear shoulder belt guide bolt (3).
5. Remove the guide (4) from the seat belt assembly.




6. Release the remaining J-channel from around the center armrest opening.
7. Remove the nut (1) from the seat belt retractor.
8. Fold the 40 percent seat cushion and back assembly forward.
9. Remove the nut (1) from the seat belt anchor.
10. Slide the seat belt and anchor through the shoulder belt opening cover to remove.




11. Remove the seat belt retractor through the armrest opening, and slide the seat belt assembly (1) through the shoulder belt opening and out through the armrest opening.

Installation Procedure




1. Install the retractor assembly by sliding the anchor and belt assembly (1) through the armrest opening and up through the shoulder belt opening.
2. Slide the seat belt and anchor through the shoulder belt opening cover.




3. Install the nut (1) to the seat belt retractor.

Tighten the nut to 52 Nm (38 lb ft).

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the nut to the seat belt anchor.

Tighten the nut to 52 Nm (38 lb ft).




5. Install the rear shoulder belt guide (4) to the belt assembly.
6. Install the rear shoulder belt guide (4) to the seat back.
7. Install the bolt (3) to the rear shoulder belt guide.

Tighten the bolt to 35 Nm (26 lb ft).

8. Install the rear seat shoulder belt opening cover (1).
9. Install the rear seat shoulder belt opening cover screw (1).

Tighten the bolt to 2 Nm (18 lb in).

10. Install the rear seat armrest. Refer to Rear Seat Armrest Replacement (AL4) (Rear Seat Armrest Replacement (AL4))Rear Seat Armrest Replacement (SUV) (Rear Seat Armrest Replacement (SUV))Rear Seat Armrest Replacement (SUT) (Rear Seat Armrest Replacement (SUT)).