Driver or Passenger Seat Belt Buckle Replacement

Driver or Passenger Seat Belt Buckle Replacement

Removal Procedure




1. Remove the front seat belt buckle nut (1).
Disconnect the electrical connection (2). The right seat buckle is shown, the left is similar.
2. Remove the seat belt buckle from the vehicle.

Installation Procedure

1. Install the seat belt buckle in the vehicle.
2. Connect the electrical connection (2).





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the front seat belt buckle nut (1).

Tighten the nut to 53 Nm (39 lb ft).