LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Front Seat Replacement - Bucket

Front Seat Replacement - Bucket

Fig 1: Identifying Front Seat Components (Bucket)
GM1950026Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove front seat adjuster track finish covers. Refer to Front Seat Adjuster Track Finish Cover Replacement .
  2. Disconnect the front seat retractor anchor by removing the nut. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1 Front Seat Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  55 N.m (41 lb ft)
2 Front Seat Nut (Qty: 2)

Tighten:  55 N.m (41 lb ft)
3 Front Seat Assembly

Procedure

  1. Remove the cover over the front seat electrical connector.
  2. Disconnect the electrical harness.
scientia non olet · About LEMON Manuals