LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Rear Seal Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood.
    2. Fig 1: Identifying Rear Hood Seal
    GM821591Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear hood seal (1) by pulling up on the seal from one end.
scientia non olet · About LEMON Manuals