LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6L80 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> On-Vehicle Repair Instructions >> Transmission Fluid Auxiliary Cooler Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Auxiliary Oil Cooler
    GM863001Courtesy of GENERAL MOTORS CORP.
  1. Install the auxiliary oil cooler to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the bolts to the transmission fluid auxiliary cooler.

    Tighten:  Tighten the bolts to 12 N.m (9 lb ft).

  3. Install the transmission fluid cooler hoses to the transmission fluid auxiliary cooler. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
scientia non olet · About LEMON Manuals